|
|
 |
|
|
|
Getting To Know Your Iron
Operating Instructions
1. Plug the appliance into an electric wall socket
2. To turn on, press the ON/OFF switch for about one second until readings appear on the LCD screen.
3. Within 30-60 seconds the heating plates will reach 210°. The iron is now ready for use for most people with normal hair, or adjust to suit using HIGH/LOW buttons.
Temperature Settings
For bleached, fragile, damaged and fine hair, the lowest settings is advised: Press LOW button to lower the temperature setting to the A zone on the display LCD.
For coarse, thick, resistant hair in a healthy condition, maximum heat setting is usually used to save time and effort. Press the high button to increase the temperature setting to the C zone.
Cleaning your Iron: When cleaning your Iron, always make sure it is cool and unplugged from the mains. Please make sure to use a soft and clean cloth when cleaning your hair iron.
|
|
 |
|
|
|
Helpful Styling Hints
Flat Straight: Insert a 2-inch section of hair between the plates, then squeeze the handle together and gently glide slowly through the hair from the root to the ends.
Flip Out: Insert a 2-inch section of hair between the plates, then squeeze the handle together and gently glide slowly through the hair from the root and slightly flip out the ends.
Soft curls: Insert a 2-inch section of hair between the plates, then squeeze the handle together and gently glide slowly through the hair from the root to the ends, then wind the hair around the plates
Flip In: Insert a 2-inch section of hair between the plates, then squeeze the handle together and gently glide slowly through the hair from the root to the ends, slightly flip in the ends.
|
Safety and Maintenance
Patented additional safety features were designed and incorporated in this digital ceramic iron in order to make very
safe to use at all times, these are as follows:
Surge protection: Whenever a power surge occurs, the built-in Safety Circuit Breaker
will turn off the power supply to the iron and will display 'Err' in the LCD. In this case,
simply unplug and plug it again.
Overheat Protection: If the plate temperature reaches over 230° C due to unstable
power, the Safety Circuit Breaker will stop power supply to the iron and the LCD will
display 'Err'. Unplug the appliance immediately.
|
|
 |
|
|
|
Safety Instructions: When using electrical appliances, especially if children are present, basic safety precautions should be followed always,
including the following:
• Do not touch heating plates
• Do not use near water.
• Read all instructions before use.
• As with most electrical appliances, electrical parts are electrically live even when the switch if off (so please be careful).
• Always unplug appliance immediately after use
• This Iron is designed to use electricity of 220-240V
• Do not reach for any electric appliance that has fallen in water
• If it fallen in water unplug the appliance immediately
• Do not clean the appliance with thinner, gasoline or alcohol
• Do not use any attachments that are not recommended by the manufacturer
• Never operate the appliance if it has a damaged cord or a plug, if it is not working properly, damaged or fallen into water
Guarantee
This product is guaranteed in respect of defects found to be due to faulty workmanship or material for the period of 12 months from the date of purchase. The date of sale and the seller's stamp is required for the validity of the guarantee. This guarantee is no longer valid if the damage has been caused by the product being dropped or been repaired by any unauthorised person. In no way dose this guarantee affect your rights under statuary law.
|
|
| / / / / / |
|
